ENGLISH
17
Weight (with smallest battery pack) .................................. 1,9 kg / 4,2 lbs.
Spindle thread .................................................................. ½“ – 20 UNF
Chuck clamping range ...................................................... 13mm / ½ in.
Sound pressure level (L
pA
) ................................................ 73 dB (A) ¦ K
pA
3 dB (A)
Acoustic power level (L
WA
) ................................................ 84 dB (A) ¦ K
WA
3 dB (A)
The noise level during operation can exceed 80 dB (A). Wear hearing protection!
Measured values determined in accordance with EN 60745.
Vibration total value (vector sum of three directions):
Vibration emission value, drilling into metal (a
h, D
) ............. < 2,5 m/s² ¦ K
h,D
1,5 m/s²
Vibration emission value, screwing without impact (a
h,S
) ... < 2,5 m/s² ¦ K
h,S
1,5 m/s²
The vibration level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibra-
tion such as: maintain the tool and the accessories, keep the hands warm, organisa-
tion of work patterns.
3
Technical Data charger and battery
(C)
Battery:
Charger:
U = Voltage
U1 = Input voltage
C = Capacity
f1 = Input frequency
W = Weight
P1 = Input power
Ic = Charge current
U2 = Charging voltage
t
= Approx. charging time (90% full)
I2 = Max. charge current
Charging voltage ............................
20,75 V DC
Nc = No. of battery cells
Charging temperature .....................
0° - 50° C
W = Weight
Max. discharging temperature. .......
5° - 50° C
Pay attention to the electrical outlet
voltage! Check the label on the bottom
of the charger!
Recharge battery pack before first use!
4
Function of the Unit
4.1
Overview RO DD60
(A)
1
Keyless chuck
6
Belt hook
2
Sleeve (torque, drilling)
7
Battery pack release button
3
Switch (1st/2nd gear)
8
Battery pack
4
Rotation selector switch (rotation setting,
transport lock) - both sides of the machine
9
LED lights
5
Bit depot
10
Trigger switch
Summary of Contents for RO DD60
Page 2: ...Overview RO DD60 B A Operating RO DD60 3 1 1 2 3 2 4 1 Nm Nm max Nm 1 2 3 4 6 9 10 5 8 7 ...
Page 157: ...NOTES ...
Page 158: ...NOTES ...
Page 159: ...NOTES ...
