18
ENGLISH
Symbol explanation:
Slow
Screws
Fast
Drill bit
First gear
Without torque limitation
Second gear
Nm
Torque
4.2
Operating RO DD60
(B)
Removing, replacing battery pack (fig. B1)
Setting direction of rotation, transporting safety device (switch-on lock.
Selecting gear stage (fig. B2)
Do not set the switch (3) unless the motor has stopped completely!
Setting torque limitation, drilling, impact drilling (fig. B3)
Switching on/off, setting speed (fig. A)
Switching on, speed: press the trigger (10). The speed can be changed by pressing in the trig-
ger.
Switching off: release the trigger (10). Note: The noise that the machine makes when it switches
off is due to the design (quick stop) and has no influence on the function or the service life of the
machine.
Keyless chuck (fig. B4)
With a soft tool shank, retightening may be required after a short period of operation.
Chuck with quick bit change system.
To remove: Push the interlock ring forward (a), advance
and pull off the chuck (b).
To mount: Push the interlock ring forward and move the
chuck as far as the limit stop on the drill spindle.
Attaching the belt hook /bit depot.
Attach the belt hook to the right (6), as shown. Attach the
bit depot to the left (5), as shown.
Summary of Contents for RO DD60
Page 2: ...Overview RO DD60 B A Operating RO DD60 3 1 1 2 3 2 4 1 Nm Nm max Nm 1 2 3 4 6 9 10 5 8 7 ...
Page 157: ...NOTES ...
Page 158: ...NOTES ...
Page 159: ...NOTES ...
