ENGLISH
4
Safety Instructions
Read and follow the instructions. The non-respect of the instructions cancels the guarantee in the event of
problems.
•
Only use the pipe cutter to cut PE-HD pipes.
•
Do never cut the extremity of a pipe, the lower vee has to lean against the pipe.
•
Assembly problems may occur in case of an inappropriate pipe cutter position. The cutting angle
α
ie.
the angle between the pipe cutter blade and the plan perpendicular to the pipe axle, has to be lower
than 3° (s. Fig.
B-2
).
•
Never place the pipe cutter at the extremity of a pipe. The pipe cutter would deform the pipe and the
blade would be bent during the cutting.
•
Do not cut welding with a pipe cutter.
•
Do never exceed the capacity of the pipe cutter.
Caution: Always wear gloves during the operation of the pipe cutter, to avoid serious
injuries.
Overview
A
1
Lock
5
Blade holder
2
Handle
6
Blade
3
Upper body
7
Lower body
4
Lubricator
8
Screw
Technical Data
Art. no:
Ø mm
Real capacity
mm
Max. thickness
mm
Weight
kg
Dimensions
L x W x H mm
1500000789
125
125
11,4
7,45
530 x 310 x 110
1500000790
225
225
18
17,6
770 x 480 x 180
1500000792
315
323,8
18
34,0
1040 x 730 x 250
Operating
B
The pipe cutter can be used in trenches. Ensure that the trench is sufficiently wide to be able to close your
pipe cutter without any problems.
Caution: Only use the pipe cutter to cut PE-HD pipes. Always place the pipe cutter blade
perpendicular to the pipe.
Î
Raise the blade
(6)
by turning the handle
(2)
in the anti-clockwise direction.
Î
Open the lock
(1)
in order to release the lower body
(7)
.
Î
Open the lower body
(7)
.
Î
Place the pipe cutter on the pipe (s. Fig
B-1
).
Î
Close the lower body onto the pipe.
Î
Release the lock
(1)
.
Î
Check whether the pipe cutter is perpendicular to the pipe to be cut (s. Fig
B-1
).
Î
Lower the blade
(6)
by turning the handle
(2)
. This operation cuts the pipe.
Summary of Contents for ROCUT XL 125
Page 31: ...Notes 29 ...
