20
ENGLISH
1.17
Improper Use of the Welding and Power Supply Cables
Do not carry the ROWELD
ROFUSE Sani 160 by its cord and do not pull
the cord to unplug the unit from the socket. Protect cord and cables from
heat, oil, and cutting edges.
1.18
Mains Power Supply
EVU wiring regulations, VDE provisions, regulations for prevention of
accidents, DIN / CE regulations, and applicable national codes have to be
respected. Mains power fuse protection should be max. 10 A. Power sup-
ply to the unit has to be connected through a leakage current switch
(earth-leakage circuit breaker rated at 30 mA false intensity).
1.19
Protecting Yourself from High Temperatures in the Fitting
Caution!
Be careful not to touch the fitting being welded or its immedi-
ate vicinity while welding is in progress and after it was finished. Tem-
peratures in these pieces may be as high as up to 200 °C.
1.20
Protecting Yourself from the Electrical Voltage in the Fit-
ting
Caution!
The voltage at the contact terminals of the fitting may be as
high as up to 230 V during welding. Therefore, ensure at all times that
neither the terminals nor the welding cables of the fitting are defective.
While welding, never touch the contact terminals and their vicinity, and
never remove the welding cable before having completely finished the
welding process.
1.21
Keeping Pipes and Fittings Dry
Never weld a fitting or pipes that are wet or filled with water.
