12
July 2017
IMO_457_DE_v0
Roto Safe C | C600 | C600 – Tandeo | H600
Subject to change.
Security
Stipulated use
Misuse
WARNING!
Danger in the event of misuse!
Misuse and incorrect installation of hardware can lead to hazard-
ous situations.
Misuse – i.e. using the product contrary to its stipulated use –
of locking systems is considered to take place in particular where
– The introduction of external and / or unsuitable objects into the
locking system or the striker plate prevents them from operating
properly.
– Obstacles are introduced into the opening area and therefore
prevent the locking systems from being used properly.
– Work is performed on the locking system or striker plate or they
are otherwise impaired in such a way that the structure, mode of
operation or correct functioning are impacted.
– The extended locking bolt or the locking elements are used
contrary to their stipulated use to keep the door open.
– The locking elements have been installed or after-treated (e.g.
painted over) in such a way that they no longer work properly.
– Loads which are not suitable for the product and exceed normal
manual force are exerted on the lever handle connection.
– Loads which are not suitable for the product and exceed normal
manual force are exerted on the locking system by the cylinder
key.
– Inappropriate, e.g. significantly deviating or incorrectly set,
locking mechanisms are used.
– The required door gap is increased or reduced when adjusting
the door hinges or lowering the door.
– A double-leaved door which is not approved for this purpose is
opened by the passive leaf.
– The lever handle and locking mechanism are actuated at the
same time.
– Tools or aids which act as a lever are used to actuate the locking
system.
– Additional loads impact on the door leaf.
– Anyone grips between the door leaf and door frame when
closing doors. (Risk of injury!)
