58
July 2017
IMO_457_DE_v0
Roto Safe C | C600 | C600 – Tandeo | H600
Subject to change.
Maintenance
WARNING!
Improperly performed maintenance work may pose a risk
of injury.
Improper maintenance can lead to serious injuries or prop-
erty damage.
– Ensure that there is sufficient space for installation before start-
ing work.
– Ensure that the installation site is clean and tidy.
– Ensure that the door cannot swing open or closed unintention-
ally during maintenance work.
– Have adjustment work on the hardware performed by a special-
ist company.
At least once per year
Specialist
company
End users
Retighten fixing screws if required.
–
Replace damaged screws.
–
Replace components if required.
–
Lubricate all movable parts with acid-free
and resin-free oil from a specialist retailer.
Lubricate steel strikers with acid-free and
resin-free grease from a specialist retailer.
=
Must
be carried out by a specialist company
–
= Must
not
be carried out by the end user; the end user must not perform any assembly
work.
= May be carried out by a specialist company or the end user
NOTE
Pay attention to the following information on environmental
protection when performing maintenance work:
– Remove leaking or excess grease at lubrication points and
dispose of it in accordance with the applicable local provisions.
– Collect replaced oil in suitable tanks and dispose of it in an
environmentally friendly manner.
Maintenance
Maintenance
Lubricate locking points (latch,
deadbolt, additional lock) at
least once per year.
