Page 18
SAFETY
READ BEFORE
YOU FEED
READ THE FOLLOWING BEFORE WELDING ON THIS MIXER
When welding on your mixer, do not allow the current to flow through the ball bearings or the roller
chains. Ground directly to the item being welded. Clean the area before welding and have a fire
extinguisher accessible at all times.
Always disconnect the scale instrumentation from the weigh bars or load cells and the power source.
Be sure the current does not pass through weigh bars or load cells or scale indicator. The towing
vehicle’s alternator should always be disconnected if the mixer is not disconnected from the vehicle.
PERFORMING MAINTENANCE (CONT):
Always use the proper tools or equipment for the job at hand.
Use extreme caution when making adjustments.
Never use your hands to locate hydraulic leaks on
attachments. Use a small piece of cardboard or wood.
Hydraulic fluid escaping under pressure can penetrate
the skin.
When disconnecting hydraulic lines, shut off hydraulic
supply and relieve all hydraulic pressure.
Openings in the skin and minor cuts can be infected from hydraulic fluid. If injured by
escaping hydraulic fluid, see a doctor at once. Gangrene can result. Without immediate
treatment, serious infection and reactions can occur.
Replace all shields and guards after servicing and before moving.
After servicing, be sure all tools, parts and service equipment are removed.
Do not allow grease or oil to build up on any step or platform.
Never replace hex bolts with less than grade five (5) bolts unless otherwise specified.
Where replacement parts are necessary for periodic maintenance and servicing, genuine
factory replacement parts must be used to restore your equipment to original
specifications. ROTO-MIX will not claim responsibility for use of unapproved parts and/or
accessories and other damages as a result of their use.
If equipment has been altered in any way from original design, ROTO-MIX does not
accept any liability for injury or warranty.
A fire extinguisher and first aid kit should be kept readily accessible while performing
maintenance on this mixer.
Summary of Contents for 1355 HDS
Page 2: ...Page 2...
Page 69: ......
