5.2.3 Eneo CC | CF latch conversion
INFO
It is not possible to convert the latch on Eneo C.
1. Push the pin (Ø max. 2.5 mm) [1] into the
inspection opening [2] until you hear it click.
INFO
Do not push out the locking pin while
doing so.
Click
1
2
3
2. Remove the latch [3].
3. Turn the latch.
4. Insert the latch straight into the shaft and push it
in.
5. Push the locking pin in.
Installation
Eneo C | CC | CF
Eneo CC | CF latch conversion
42 ·
05 / 2020
·
IMO_438_EN_v3
Roto Safe E Eneo C | CC | CF
Subject to change.
