u
The latch must retract.
u
When pushed down, the latch may protrude over the lock faceplate by a maximum of 2 mm.
2. Release the door lever handle.
u
The latch must extend fully.
3. Turn the key in the profile cylinder in the unlocking direction.
u
The latch must retract fully.
4. Turn the key in the profile cylinder in the locking direction.
u
The latch must extend fully.
Deadbolt function
Insert the key into the profile cylinder and turn in the locking direction:
Push-back safeguard: turn once
Locking: turn twice
u
The deadbolt must be extended fully (11 mm or 20 mm).
u
All additional locking points must be in the locking position.
u
It must be possible to remove the key.
Have malfunctions remedied by a specialist company.
When the door is closed
Locking process
Close the door.
u
The latch must run into the frame component and keep the door closed.
Opening using the door lever handle
With the door closed, push the door lever handle all the way down.
u
The latch must retract fully so that the door can be opened.
Locking using the key
With the door closed, turn the key in the locking direction.
u
The key must be easy to turn.
u
The latch and all deadbolts must run smoothly and extend fully.
Unlocking using the key
With the door locked, turn the key in the unlocking direction.
u
The key must be easy to turn.
u
The latch and all deadbolts must retract fully.
Have malfunctions remedied by a specialist company.
Maintenance
Performance test
92 ·
05 / 2020
·
IMO_438_EN_v3
Roto Safe E Eneo C | CC | CF
Subject to change.
