1 General information
1.1 Version history
Version
Date
Changes
v3
11.05.2020
Finger scan with app (new product)
1.2 Instructions
This manual contains important information, instructions, application
diagrams (max. sash sizes and weights) and assembly instructions for the
installation, maintenance and operation of hardware.
The information and instructions contained in this document refer to
products belonging to the Roto hardware system named on the front page.
All steps must be completed in sequence.
The following documents apply in addition to these instructions:
Catalogue
■
Roto Safe catalogue: CTL_86
Installation instructions
■
Roto Safe cable junction: IMO_502
■
Connection diagrams: IMO_310
Brief instructions
■
Power supply unit specifications: SUG_3
■
Roto Safe Eneo: SUG_11
■
Finger scan with app: SUG_37
■
Phone & Code: SUG_38
Additional guidelines and directives
■
Instructions and information issued by profile manufacturers (e.g.
manufacturers of windows and balcony doors),
■
The applicable regulations, directives and national laws.
Storing the instructions
These instructions are an important part of the product. The instructions
must be stored so that they are always to hand.
Explanation of the markings
The manual uses the following markings for emphasis (e.g. in figures or
instructions):
Marking
Meaning
Sash
Frame
Drill holes, routing or screw positions
Unaffected components
Indirectly affected components
General information
8 ·
05 / 2020
·
IMO_438_EN_v3
Roto Safe E Eneo C | CC | CF
Subject to change.
