background image

 

ATTENTION

Using incorrect cleaning agents and sealing
compounds may cause property damage.

Cleaning agents and sealing compounds may damage the
surfaces of components and gaskets.

u

Do not use aggressive or flammable liquids, acidic cleaners or
abrasive cleaners.

u

Only use mild, pH-neutral cleaning agents that have been
diluted.

u

Apply a thin protective film to the components, for example
using a cloth soaked in oil.

u

Avoid aggressive vapours (e.g. produced by formic acid,
acetic acid, ammonia, amine compounds, ammonia
compounds, aldehyde, carbolic acid, chlorine, tannic acid)
around the element.

u

Do not use any acetic acid-crosslinking or acid-crosslinking
sealing compounds or those with the aforementioned constit-
uents as both direct contact with the sealing compound and
its fumes can corrode the surface of the components.

 

ATTENTION

Contamination may cause property damage.

Contamination prevents components working properly.

u

Remove deposits and contamination caused by construction
materials (e.g. plaster, gypsum).

u

Keep components free of deposits and contaminants.

 

ATTENTION

(Permanently) damp room air may cause property
damage.

Damp room air can lead to mould growth and corrosion caused
by condensation.

u

Provide adequate ventilation for components, particularly
during the construction phase.

u

Intensively air out the room several times per day by opening
all elements for approximately 15 minutes. If intensive airing is
not an option, place the elements in the tilt position and
provide airtight masking inside the room, e.g. if there is fresh
screed that cannot be walked on or must not be exposed to
draughts. Discharge any humidity present in the room air to
the outside using condensation dryers.

u

Establish a ventilation plan for more complex construction
projects if necessary.

u

Provide adequate ventilation during holiday periods as well.

General information

Preserving the surface finish

Subject to change.

Roto Safe - Cable junctions

IMO_502_EN_v2

 · 

05 / 2020

 · 11

Summary of Contents for Safe



















































Reviews: