3D+ ROAD
INSTALLATION GUIDE.
BB30 + BB30 PressFit FRAMES
BCD 130 / BCD 110
#R3
Allen 8mm
#R4
TL-LR15
ROTOR COMPONENTES TECNOLÓGICOS SL
Pol.Ind. Conmar. C/Miño, 16-18. 28864, Ajalvir, Madrid, Spain.
Phone: +34 91 884 38 46 / Fax: +34 91 884 38 65
int.service@rotorbike.com
CRANKSET REMOVAL (Cont.)
#1.
Non Drive-side Assembly Installation.
#R5
Allen
8mm
*
ONLY NEEDED WITH BB30 FRAMES (BEARINGS ARE
PRESSED DIRECTLY INTO THE FRAME).
IN PRESS FIT 30 FRAMES THE CUPS REPLACE BOTH THE
BEARING AND SEAL.
SEAL
1.6mm width
(Not included)
BEARING
30x42x7
(Not included)
SPACER
11.5mm
*
*
W
D
1. BB30 standard.
2. BB30 Press fit cups standard.
3. BSA thread standard.
(Read ROTOR BSA30 cups installation guide;
BSA30 bottom bracket not included with 3D+ cranks)
4. Cervélo BB Right standard.
(Read 3D+ installation guide for BB Right system)
3D+ COMPATIBILITY:
This user manual is only valid
for BB30 and BB30 Press Fit
road frames.
Revised: 09/2010
Please note: specifications are subject to change for improvement without notice.
1
2
3
W
D
BB30
BB30
Press Fit cups
BSA
68mm
68mm
68mm
42mm
46mm
BSA
Thread
4
BB Right
79mm
42mm /
46mm
(PressFit)
WASHER
1mm
