4
Actuator Setting Tool Pro v1.1
4. Instructions for Safe Selection, Installation, Use, Maintenance and Repair
The following instructions relevant to safe use in a
hazardous area apply to equipment covered by CSA
certificate numbers 80005457, IECEx SIR 19.0034
and CML 19ATEX2194.
1.
The BTST v1.1 may be used in Division 1, 2
and Zones 0, 1, 2 hazardous areas that require IIC,
IIB or IIA protection and temperature class T1, T2,
T3 or T4.
2.
The following checks must be conducted on the
BTST v1.1 prior to taking it into a hazardous area:
a.
The BTST v1.1 function must be checked by
ensuring a red or green LED illuminates under
the ‘Enter’ key when any button is pressed.
If an LED does not illuminate, the BTST v1.1
requires inspection and battery replacement.
b.
The BTST v1.1 does not require assembly or
dismantling, however suitable precautions
must be taken if the BTST v1.1 may come
into contact with damaging substances (e.g.
solvents that degrade polymeric materials).
Regular inspections must be performed to
confirm enclosure damage is not apparent.
Do not use the equipment if damage is
present.
3.
The BTST v1.1 is not intended to be repaired by
the user. Repair of the equipment is only permitted
by the manufacturer or an approved agent in
accordance with applicable code of practice.
4.
No user adjustment of the BTST v1.1 is required.
5.
The BTST must be inspected every three
months, in a safe (non-hazardous), dry area by
suitably trained personnel, to ensure it has been
maintained in accordance with the applicable code
of practice.
6.
Subject to the applicable code of practice, the
batteries may be replaced in a non-hazardous
area with one fo the following types of Alkaline-
Maganese or Zinc-Maganese ‘AAA’ size batteries:
- Duracell Procell type MN2400
- Energizer Ultimate
- Energizer HighTech
- Duracell Ultra
- Varta Industrial
- Varta High Energy
- Panasonic Pro Power
- Eveready Super
- Duracell Chinese
7.
The BTST v1.1 contains no other user
replaceable parts and it cannot be repaired by the
user. If the BTST v1.1 is faulty or needs repairing, it
must not be used.
