22
Installation & Maintenance
Instructions
7.0 Basic Setup
7.4 Select Local Operation
The LOCAL/STOP/REMOTE selector determines the actuator
operating mode at all times. LOCAL mode must be active in
order to edit and save configuration parameters.
STEP 1
SELECT LOCAL
OPERATION
STEP 2
SET OUTPUT
THRUST
STEP 4
SET CLOSE LIMIT
OF TRAVEL
STEP 5
SET OPEN LIMIT
OF TRAVEL
STEP 6
CALIBRATE COMMAND
SIGNAL ZERO SETPOINT
STEP 7
CALIBRATE COMMAND
SIGNAL SPAN SETPOINT
STEP 3
SELECT ACTION AT END
OF TRAVEL (LIMIT OR FORCE)
STEP 8
DEADBAND
POS I T
REMOTE
POS I T
LOCAL
Fig 7.2
Actuator in STOP
Fig 7.3
Actuator in LOCAL
Fig 7.4
REMOTE mode indication
Fig 7.5
LOCAL mode indication
Rotate the LOCAL/STOP/REMOTE selector anti-clockwise
until the LOCAL symbol is directed towards the LCD
position display.
The user interface LCD display will show the current
active mode.
A4
US
US
A4
US
A4
US
A4
