A4
US
US
A4
US
A4
US
A4
A4
US
US
A4
US
A4
A4
US
IQ3 Full Configuration Manual – Section: Settings
13
Positioner
– Used only with analogue or network position
control. Display indicates current valve position (
) to one
decimal place plus the position equating to the applied demand
signal (
). In addition, an analogue indication of demand and
position is provided scaled 0% to 100% of valve position.
To set the home screen,
. The drop down
list box will close and the selected home screen will be
indicated.
2/7
Power Save
The LCD has a white backlight to maximise contrast of the
segment display and matrix characters. It may be switched off
when not required if a bright display is disruptive within its
environment.
Off (default)
- The display backlight is permanently illuminated
when the actuator is powered up.
On
- The display backlight automatically switches off when the
actuator is not operating. The segments/matrix remain on. The
display backlight will switch on when the local control selectors
are moved, electrical or handwheel operation takes place or
when the Setting Tool is communicating with the actuator. The
backlight will switch off again approximately 30 seconds after
the above events have taken place.
To change the power save mode,
. The checkbox
will indicate the selected mode.
LED
The function of the display green, red and yellow LED lights can
be set.
3/7
Close Colour
Green (default)
– The green lights illuminate at the Closed Limit
position, red at open.
Red
– The red lights illuminate at the Closed Limit position,
green at open.
To change the Closed Limit position indication light,
. The checkbox will indicate the selected closed
colour.
4/7
Mid Travel LED
On (default)
– The yellow lights are on when mid-travel.
Off
– The yellow lights are off when mid-travel.
Blinker
– The yellow lights flash at approximately 0.5 second
intervals when travelling in mid-travel (electric or handwheel
operation). When stationary, the lights will remain on.
On/Alarm
– The yellow lights are on when mid-travel. If an
alarm is active the yellow lights flash alternately at approximately
0.5 second intervals. Refer to 5/7 Alarm LED.
Off/Alarm
– The yellow lights are off when mid-travel. If an
alarm is active the yellow lights flash alternately at approximately
0.5 second intervals. Refer to 5/7 Alarm LED.
Information regarding the nature of the alarm(s) will be shown at
the top of the display.
To change the mid-travel LED Mode,
. The drop
down list box will close and the selected mode will be
shown.
5/7
Alarm LED
Alarm LED Function will be greyed out unless 4/7 Mid Travel LED
is set to On/Alarm or Off/Alarm.
Disabled (default)
– The yellow lights do not indicate an
active alarm.
Alarms
– The yellow lights indicate active alarms.
Service
– The yellow lights indicate active service alarms only.
A service alarm indicates the actuator requires service due to set
duty parameters being met. Refer to Section 5.5.
Service/Alarms
– The yellow lights indicate active alarms and
active service alarms. A service alarm indicates the actuator
requires service due to set duty parameters being met. Refer to
Section 5.5.
Information regarding the nature of the alarm(s) will be shown at
the top of the display.
To change the Alarm LED Mode,
. The drop
down list box will close and the selected mode
will be shown.
6/7
LCD / LED Test
The LCD/LED test function operates a test procedure to check all
of the local display functions. It will cycle periodically between
screen and LED functions to provide visual indication that the
display is in fully working order.
Press
to begin the test. The screen will return to the
local display menu once the test is complete.
7/7
Language
The language used on the display can be selected.
English (default), French, German and Spanish
are available
as standard. Other available languages may be downloaded from
the Rotork website, loaded into the Setting Tool using Insight2
and uploaded into the actuator. Visit
www.rotork.com
To change the display language,
. The drop
down list box will close and the selected language will be
active for all screens and pages.
Available for actuators with a build date after December 2013
(12/13).
2.2.2 Indication – Local Display
continued
Summary of Contents for IQ Multi-Turn
Page 2: ...2...
