A4
US
US
A4
US
A4
US
A4
A4
US
US
A4
US
A4
A4
US
14
IQ3 Full Configuration Manual – Section: Settings
Settings
Limits
Indication
Control
ESD
Security
Defaults
Indication
Contacts
Local Display
Analogue
Analogue
Analogue
Invert
On
Off
1/1
Analogue position indication screen is shown above with
its default setting.
Analogue position indication (4-20 mA) is an optional extra, refer
to circuit diagram for inclusion. If the option is not fitted the
Analogue menu item will not be present in the Indication menu.
The analogue output signal auto ranges to the set limits and
cannot be calibrated.
1/1
Invert
Off (default)
– 4 mA output at Closed Limit position / 20 mA
output at Open Limit position.
On
– 4 mA output at Open Limit position / 20 mA output at
Closed Limit position.
To change the analogue output mode,
. The
checkbox will indicate the selected mode.
2.2.3 Indication – Analogue
Settings
Limits
Indication
Control
ESD
Security
Defaults
Instruction is provided on:
2.3.1
Local control
Settings for vandal resistant build, Setting Tool control,
maintained local control, delay control and action on
loss of actuator user interface.
2.3.2
Remote control
Settings for control source; hardwired, networks,
analogue and partial stroke setup.
2.3.3
Interrupter Timer
The Interrupter Timer is an optional extra, check circuit
diagram for inclusion. If it is not enabled it will not be
included in the display menu. It is used to control
closing and/or opening operating time under both
local and remote control.
2.3 Settings – Control
Summary of Contents for IQ Multi-Turn
Page 2: ...2...
