A4
US
US
A4
US
A4
US
A4
A4
US
US
A4
US
A4
A4
US
34
IQ3 Full Configuration Manual – Section: Settings
2.5 Settings – Security
Settings
Limits
Indication
Control
ESD
Security
Defaults
Bluetooth
High: Infrared Initiation only
Password
Change
Default
Lost Code
L81L18
Re-Enter
1/5
Sets Bluetooth communication and Password security
levels. The default settings are shown above.
1/5
Bluetooth
Low: Discover always –
The actuator is available for
Bluetooth
communication using a PC running Insight2 at all times. This
setting provides convenient connection when Insight2 is used.
Communication with the
Bluetooth
®
Setting Tool Pro is available.
Medium: Discover in Local and Stop –
The actuator is available
for
Bluetooth
communication using a PC running Insight2 when
it is selected to Local or Stop using the red selector. Connection
is unavailable in Remote. The Local/Stop/Remote selector can
be padlocked in all three positions. Communication with the
Bluetooth
®
Setting Tool Pro is available.
High: Infrared Initiation only (default)
– The actuator is
not available for
Bluetooth
communication using a PC running
Insight2. Communication with the
Bluetooth
®
Setting Tool Pro is
available using the quick connect method. Refer to 1.2.
Very High: Disabled. Infrared only
– All
Bluetooth
communication is disabled. Communication is by infrared
commands from the
Bluetooth
®
Setting Tool Pro only.
Refer to 1.2.
Note. If requested, the user required Bluetooth security
level can be set and made non-editable by Rotork.
Contact Rotork.
To change, . The drop down list will close and
the selected Bluetooth security level will be indicated.
2/5
Change
The default password is
ROTORK
, 2/5 Change password will
indicate: Default.
This can be changed to a new password selected by the user.
To set a user selected Password press . The Change password
display will be shown.
Enter user selected Password:
Use to highlight new password entry box and press
Use to scroll through alphanumerical values to display
required character.
Use to move to next character.
Use to delete the previous character.
Use when selected password is complete.
Navigate to the OK button using . Press .
The user selected password is now active. Refer to 1.3.
2/4 Change password will then indicate: User.
The Lost Code characters will change. Refer to 3/5.
3/5
Lost Code
Non editable. Lost Code is used if a user password has been set
and then lost or forgotten.
Contact Rotork quoting the code as read from the display. After
caller verification, Rotork can then provide the user set password.
4/5
Re-Enter
The Re-enter password control is used when high level access is
required by Rotork Service or by a user requiring high level access
in order to make other settings available. Contact Rotork for user
high level password.
Enter the provided higher access level password, refer to 1.3.
Once correctly entered, access to high level settings as indicated
in this manual will be made available.
Refer to PUB002-059 for information on the Remote
Hand Station.
Summary of Contents for IQ Multi-Turn
Page 2: ...2...
