Pakscan IIE System Manual
26 of 132
Publication S177E V2.0 Issue 03/05
Terminal 22 & 23, Terminal 24 & 25
If the master station is not part of a hot standby pair, that is, it is a single stand-alone unit then two
links
MUST
be fitted. (A hot standby pair always includes the PS300 switch module in the centre of the
rack.)
If the rack does not contain a PS300 Switch module:
Link terminal 22 to 23
Link terminal 24 to 25
6.3 Display Screen Contrast
On the front of the master station there is a multi-turn potentiometer that is used to adjust the contrast
of the LCD display. Adjusting clockwise increases the contrast.
Fig 7: Master Station front panel
Field
Alarm
New
Alarm
Addr
Fault
Host
Active
Masterstation
Active
Alarm
PS100
PS100
Standby
Port
A
Port
B
Contrast
Menu
1
2
3
6
5
4
7
8
9
0
*
LOAD
CLEAR
Configuration
Contrast
adjustment