![background image](http://html1.mh-extra.com/html/rotork/pakscan-iie/pakscan-iie_system-manual_1491751051.webp)
Interface and Menus
51 of 132
Publication S177E V2.0 Issue 12/04
8.8 Setup
Menus
8.8.1
Top Setup Menu
Port setup
1>Ports 2>Standby
Only shows on hot standby units
Loop options
3>Loop 4>Address
Unit addresses
Set tag names
5>Tags 6>Time
Date and time
ESD options
7>ESD 8>Security
Access level settings
Commands available:
-
Go to Port 1 setup page
-
Go to Standby mode menu page
-
Go to Loop options page
-
Change unit address used in communications with host computers,
-
Go to FCU Tag names page
-
Go to Date and Time setup page
-
Go to ESD configuration page
-
Go to Access level and security page
-
Return to previous menu
Note: The Setup options can be PIN protected. See sections 8.3 and 8.8.9
1
3
4
MENU
5
6
7
8
2
Note: When the Ethernet connections are being used the port settings are critical. See
section 12.