5
USING YOUR HOT TUB’S CONTROL PANEL
AND FEATURES.
Please see below for information on how to use your control panel and any extra features fitted on your QuattroSpa.
Your QuattroSpa is fitted with a 2 speed pump as standard which means you will be able to alter the
strength of the jets, to put the pump into manual mode low speed, press the pump button once, push a
second time to put the pump into manual mode high speed. To ensure your RotoSpa retains its
temperature please return to auto mode when not in use.
Your QuattroSpa comes with a single colour LED light as standard. To operate the LED light push the up
button once, this will turn it on. If you upgraded your LED light to a Mulitcolour then pressing the up
button 3 times will put the light into a slow cycle throughout the colours, push it a fourth time will put it
into a fast cycle, 5 pushes turns the light off. Pushing the down button will allowing you to choose one set
colour (light must be on for this to work).
Fitted to the topside of your QuattroSpa is a grey dial. This is called a Venturi air control and will introduce a
small amount of air into the water when flowing through the jets, increasing the pressure and massage
effect. To operate simply twist the dial into the on position. Ensure these are turned off when not in use as it
the air will increase ph. levels and will add cold air into the water increasing running costs.
Variable speed air blower
(Optional extra, not fitted as standard)
- The air blower introduces an alternative feel of massage. The small
pepper pot like jets allow millions of bubbles to gently massage you and fellow bathers, you can alter
the speed of the blower too.
To turn the blower on push the button as shown to the left once, this will show a
red light and be on full. Press twice and the light should change to orange, at this
point if you use the up and down keys you will be able to adjust the speed of the
air.
Push the blower button a third time and this will put it in to oscillating mode-
Green Light To turn the blower off you will need to push the air button a fourth time.
Air diverter- This is a feature sited only on the QuatroSpa. This dial will divert the flow of water from
one side of the hot tub to the other, or, if moved to the centre will evenly distribute the flow
throughout all of the jets.
