Disconnect the plug from the power source before making any assembly, adjust-
ments, or changing accessories.
Such preventative safety measures reduce the risk
of starting the tool accidentally.
Form No. 2610007224
Printed 02/10
1
2
4
3
6
5
8
9
11
10
7
Robert Bosch Tool Corporation
1800 W. Central Drive, Mount Prospect, IL 60056
1-877-ROTOZIP (1-877-768-6947)
www.rotozip.com
The CRCT4 Circle cutting guide uses special
adapters that allow it to be used on many different
Spiral Saw
®
models. Find the instructions for your
Spiral Saw
®
model, then follow the instructions
carefully on how to install and operate the circle
cutting guide.
1 Screw
2 Nut
3 Circle Cutter Arm
4 Threaded Knob
5 Pivot Point
6 Knob
7 Long Wing Screw
8-11 Special Adapters
Rebel, Revolution, Pro Series Classic,
and RZ1-RZ25 Models
Attach To Tool
1. Locate the special adapter (8) for the
models listed above.
2. Slide the special adapter into the base
guide as shown.
3. Snap the special adapter down into place
so the tab is secured into the small hole in
the depth guide.
4. Place circle cutter arm (3) onto depth
guide and secure with threaded knob (4).
Tighten securely.
DR01 and CR18L Models
continued on next page
1. Locate the special adapter (9), oval base
(10), and long wing screw (7) for the models
listed above.
2. Remove the depth guide and short wing
screw from your tool and set them aside.
Use the lock washer in next step.
3. Attach the special adapter (9) to your tool
using the long wing screw (7) and lock
washer.
MODEL CRCT4 Circle Cutter Attachment Kit
WARNING
DM 2610007224 02-10:CRCT 1 2/23/10 9:43 AM Page 1
