-14-
Disconnect the plug from the power source before making any
assembly, adjustments or changing accessories. Such preventive safety
measures reduce the risk of starting the tool accidentally.
!
WARNING
Always use auxiliary
handle for maximum
control over torque reaction or kick-back.
Operation of the tool without the auxiliary
handle could cause loss of control of the tool,
resulting in possible serious personal injury.
REMOVING AND INSTALLING
ABRASIVE CUT OFF ATTACHMENT
(Keyless models)
Disconnect the plug from
the power source before
making any assembly, adjustments or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally. Make certain that the keyless
chuck is securely tightened before turning the
tool on.
1. Depress and hold the shaft-lock in and
rotate the keyless chuck and shaft until the
shaft-lock engages and holds the shaft
(Fig. 2).
2. Rotate the keyless chuck (counter-
clockwise) until chuck it is completely open.
3. Insert drive bit into the keyless chuck up to
the flange, and securely tighten chuck.
4. Open locking lever and position
attachment onto the collar. Note: It may be
necessary to rotate attachment slightly and
hold both the tool and attachment shaft
!
WARNING
!
WARNING
Zipmate attachment must be used only with an hard auxiliary control
side handle. Two handed control of solid gripping handles will provide
sufficient control of the cutting wheel in case of recoil.
!
WARNING
Zipmate
®
Abrasive Cut Off Attachment
Recommended for use with: Rebel, Revolution,
and all RZ model Rotary Tools.
Hard auxiliary control handle must be obtained for models RZ1 and RZ25.
Call 1-877-ROTOZIP.
Note : The speed of your tool will be reduced 2 : 1 when using your Abrasive Cut-Off attachment.
SHAFT LOCK
WHEEL GUARD
ABRASIVE
WHEEL
LOCK
LEVER
GUARD
LOCK LEVER
ADJUSTMENT
SCREW
WHEEL GUARD
LOCK LEVER
LOCK LEVER
ADJUSTMENT
SCREW
!
WARNING
Assembly
Functional Description and Specifications
FIG. 1
RZ 2610954840 07-07 8/16/07 3:55 PM Page 14
