Disconnect the plug from the power source before making any
assembly, adjustments or changing accessories. Such preventive safety
measures reduce the risk of starting the tool accidentally.
!
WARNING
Functional Description and Specifications
Optional Circle Cutter Attachment
NOT INCLUDED WITH ALL KITS
ATTACHING DUST SHIELD
1. Position dust shield as shown and push
shield into depth guide until tabs on dust
shield lock into slots on both side of the
depth guide.
2. To remove dust shield, squeeze both sides
of dust shield and remove from depth guide.
3. Push either end of the vacuum hose
provided with kit into dust port on dust
shield.
4. Push opposite end of vacuum hose into
small end of hose adapter.
5. Push shop vacuum hose into large end of
hose adapter.
For use with 1-1/4", 1-1/2", 2-1/4" or 2-1/2"
diameter vacuum hoses.
BELT CLIP
When the hose adapter is attached to the belt,
position yourself to avoid entanglement
with surrounding objects. Unexpected
entanglement could cause the tool to fall
resulting in injury to the operator or bystanders.
The belt clip will allow you to conveniently
attach your vacuum hose to your belt. This
feature will allow you to have both hands free
when climbing a ladder or moving to another
work area.
-12-
ATTACHING CIRCLE CUTTER
1. Loosen the depth guide thumbscrew and
extend the depth guide as far as it will go.
2. Insert adapter into hole from the top side of
depth guide as shown (Fig. 10).
3. Position in circle cutter arm onto threaded
portion of the adapter from bottom side of
depth guide and securely tighten with lock
nut.
ADAPTER
DEPTH
GUIDE
FIG. 10
CIRCLE CUTTER ARM
LOCK NUT
Dust Extraction Kit
NOT INCLUDED WITH ALL KITS
DUST SHIELD
TAB
DEPTH
GUIDE
VACUUM
HOSE
DUST
PORT
HOSE ADAPTER
VACUUM
HOSE
SHOP VACUUM
HOSE
BELT CLIP
FIG. 11
RZ 2610015858 02-12:RZ 2610015858 02-12.qxp 1/25/12 1:32 PM Page 12
