10. OPENING THE SAFE USING THE RFID ENABLED CARD
a. With the door closed or the bolt mechanism extended, hold an RFID enabled card into the
fitting between the keypad and the emergency opening lock cover that you locked with.
b. During the opening process "OPEN" appears on the display.
c. After the safe has been opened, "OPENEd" appears on the display.
d.
ATTENTION
If the "ERROR" message appears on the display during the opening , start the
opening process described at point 10.a using the RFID enabled-card.
11. OPENING WITH THE EMERGENCY OPENING KEY
a. Remove the cover of the emergency opening lock situated on the right side of the fitting by
sliding it to the right.
b. Insert one of the two supplied emergency opening keys into the lock.
c. Turn the key to the left.
d. If the battery voltage is sufficient, "OPENEd" is displayed and the safe is open.
e. To remove the key you have to turn the key back to the starting position
– the safe is closed
again.
