4 Options
14
4000021245
4.2
Rope end control
Rope end control consists of a roller and a switch to detect
if limit of safety wraps are reached.
Fig. 11 Pressure roller incl.
rope end control, view
from the top
20.35" Max.
Fig. 12 Dimensions with
pressure roller and
rope end control
Added weight for pressure
roller with rope end control
Gear
motor
GM085
Gear
motor
GM107
Piston
motor
PM049
weight pressure roller incl. rope
end control [lb]
approx. 11,9
Tab. 5 Data with pressure roller and rope end control
Rope end control:
The rope end control is mechanically attached to pressure
roller housing. The optional rope end control is only availa-
ble in combination with the pressure roller. The threshold
signal „rope end“ is emitted by an electric switch.
Application benefit:
Signal of rope end at either:
•
3 rope wraps or
•
5 rope wraps
Correctly utilized the rope end signal can be used to pre-
vent spooling in the wrong direction.
Different standards require a rope end control.
