KIT CONTENTS:
(2) Roof Sections
(1) 5’ Molding
(12)
1/4”
-
20 x 3/4” Bolts
(12) 1/4”
-
20 Acorn Nuts
(24)
1/4” Flat Washers
(6) 1/4” x 1” Fender Washers
(6) 1/4”
-
28 x 1” Bolts
(6) 1/4”
-
28 Nylock Nuts
(6) Black Spacers
(6) 1/4” P
-
clamps
Thank you for choosing Rough Country for all your UTV needs.
Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be
sure you have all needed parts and know where they go.
If question exist, please call us @1
-
800
-
222
-
7023. We will be happy to answer any questions concerning this product.
Check all fasteners for proper torque. Check to ensure for adequate clearance between all components.
Periodically check all hardware for tightness.
TOOLS NEEDED:
1/4” Drill
Drill Motor
7/16” Socket/Wrench
Ratchet
Marker
Knife or Scissors
Universal 60” Wide UTV Roof
92179500000
Installation Instructions
1.
Working from one side to the other, slide the supplied H molding onto one of the roof sections.
Leave some of the
molding overhanging on each side, to be trimmed flush with the edge after the roof assembly is
complete.
See Photos 1 & 2.
Photo 1
Photo 2
Summary of Contents for 92179500000
Page 4: ......
