14. Place light bracket inside of air duct.
See Photos 13-15.
15. Align mounting holes with crash bar mounting holes.
See Photo 16.
16. Using factory hardware, install crash bar in factory location and tighten with a 15mm socket.
See Photo 17.
17. Reinstall the bumper and fascia, start 2 of the upper fascia screws to hold the bumper into place. Hold the air duct
up over the internal foam while securing the bumper and fascia.
See Photo 18.
Photo 18
Photo 13
Photo 14
Photo 15
Photo 16
Photo 17