Ford 2017-18 Raptor Triple Fog Light Mounting Kit
Thank you for choosing Rough Country for all your suspension and lighting needs.
Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be
sure you have all needed parts and know where they go.
921706990
INSTALLATION INSTRUCTIONS
1.
Use these 2 existing holes for mounting the light mount.
See Photo 1
2.
Place light mount in bumper from inside of the fender well, using the supplied 6mm x 20mm bolts, flat washers and
lock nuts.
See
Photo 2.
KIT CONTENTS
(2) Light Brackets
(6) 1/4” x 3/4” Stainless Carriage Bolts
(6) 1/4” Stainless Flat Washers
(6) 1/4” Stainless Lock Nuts
(4) 6mm x 20mm Bolts
(4) 6mm Nylock Nuts
(8) 6mm Flat Washers
TOOLS NEEDED
10mm Socket
10mm Wrench
15mm Socket
7/16” Wrench
PHOTO 1
PHOTO 2
Use these 2 holes for mounting.
Place fog light bracket in bumper.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all
applicable , State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be
the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any
items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough
Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the
items.