Using the transmitter, select the desired direction of travel and then slowly
open the regulator. The locomotive will now move off as described in the
manual control section.
For more information on using the radio control equipment, see the
manufacturers instruction booklet supplied with the Radio Control Set.
The art of fine control will soon be learnt with a little practice
NOTE:
Always hold the reversing lever fully over in the required
direction when the engine is moving. The model is fitted with a simple
reversing valve gear and is not capable for 'notching up' (altering the valve
cut off). Always bring the locomotive to a halt by closing the regulator
before changing direction. If an emergency stop is required, simply
release the reversing lever, which will spring back into mid gear and halt
the train. Then close the regulator. Always ensure that the regulator is
closed before switching off the transmitter.
Always switch off the receiver and transmitter when not in use to preserve
battery life. It is good practice to switch on the transmitter before the
11
