Adjustable Lock Jig
Adjustable Lock Jig
n
Contains four templates to control the width of the lock and face plate :-
Face plate widths are 25.4mm and 22.5mm; lock widths are 16mm and 19mm.
n
The length of the lock jig aperture can be adjusted from 0 to 208mm.
n
Quick and easy to set up.
n
The jig has engraved markings to aid setting up.
Other Equipment required:-
n
12.7mm diameter straight cutter.
n
16mm diameter guide bush.
n
At least two clamps to secure jig to door.
n
Philips screwdriver.
Instruction Leaflet
Instruction Leaflet
4 interchangeable templates
to control the width of the aperture.
Face plates templates:-
A = 25.4mm
B = 22.5mm
Lock templates:-
1 = 16mm
2 = 19mm
Centre Line markings
to centre the jig to
the door.
Adjustable
Length Plates.
Key hole slots for
quick and easy
template changing
Use a set of clamps on
the fixing plates to secure
the jig to the door.
Jig centring adjustment.
Length adjustment
engraving.
