12.7mm (1/2”) cutter
16mm
Dia bush
Adjustment Plate
Jig
Actual Face Plate Size
1.65mm
1.65mm
Adjustment Plate
Adjustable Lock Jig
This diagram explains the offset between the cutter
and the bush.
7.
The width of the face plate/lock is governed by any
of the four templates you use. Each has a letter or
a number engraved on it which relates to the
following widths:-
Face Plate Template “A” = 25.4mm
Face Plate Template “B” = 22.5mm
Lock Template “1” = 16mm
Lock Template “2” = 19mm
8.
Decide upon the template and attach it to the jig
using the keyhole slots. Make sure the arrows line
up. Tighten the screws to secure the template.
9.
The lock jig is now set. Set your router to cut the
thickness of the face plate - refer to the router
manual.
10. Continue to rout the face plate aperture.
Setting up the Lock Face Plate cont...
Setting up the Lock Face Plate cont...
Template
Keyhole
slot
