USER MANUAL
24
SPLIT RECORD MODE (Loop Cycle Recording):
• This function will split video files to desired configuration of
1-min, 3-min or 5-min.
• When you select either 1-min, 3-min or 5-min, which will TURN
ON Loop cycle function. This allows old video files to be replaced
automatically with new video files so it can continuously record
in an infinite loop overwriting the oldest video file with the
newest files so you don’t have to manually delete videos from
memory card when it is full.
• By choosing “OFF” when memory card becomes full, it will
display “CARD FULL” and it will NOT allow you to record any
further until you manually delete all video files.
OPTIONS: 1-min, 3-min, 5-min, OFF
MIC (In-Built Microphone):
• Rove Dash-Cam has built in microphone. You can choose the
microphone on/off as per your need.
OPTIONS: Mic ON, Mic OFF
ANTI-FLICKER:
• Here you can set the sensor flicker frequency to fit your AC
power frequency and reduce the effect of flickering lamps.
OPTIONS: 60Hz, 50Hz
2. Photo Mode Settings:
PHOTO RESOLUTION:
• Here you can choose the photo resolution you want to use; higher
resolution photos will take more storage space.
OPTIONS:
S1= 4M (2688x1512 16:9); S2= 8M (3264x2448 4:3); S3= 14M
(4384x3288 4:3); S4= 16M (4608X3456 4:3)
PHOTO QUALITY:
• Here you can adjust the photo quality. The quality will affect photo grains,
sharpness, and contrast and so on. Better quality photos will take more
storage space.
OPTIONS: Super Fine, Fine, Normal
