Operating Procedures
Rovema VPK Operators Manual
3/2000 VPK REV(B) PANELVIEW 600
7-4
Making Empty Bags
Empty bag production will indicate whether adjustments need to be
made to the sealing devices, to the film tracking, to film feeding, or to
film registration (if using registered film).
Use the following procedure to make empty bags:
1.
Set the JOG/AUTO selector switch to AUTO.
2.
Press the SYSTEM READY push-button.
If the button does not stay lit, there is an alarm condition present.
Correct the alarm condition, clear the alarm from the screen, and
press the SYSTEM READY push-button again.
3.
Press the JOG/RUN push-button to begin empty bag production.
4.
Allow the bagmaker to form a few empty bags.
5.
Press the STOP push-button to stop empty bag production.