Step 2: Rotate Front Wheels & Set Guide Pin (cont.)
Step 3: Install Knee Platform & Adjust Height
The knee platform is designed to be used with either the right or left
leg. Insert the knee platform post into the receptacle tube. Next, set
the knee platform at your desired height for use by inserting the
locking pin through the aligned holes. Finally, tighten the clamp lever
to secure the knee platform in place. Once knee platform is locked in
place, install the black knob (as shown below) to set the handlebars at
a comfortable height for operation (typically at waist height).
Step 4: Brake Operation
To engage the brake, squeeze the brake lever on handle bar.
Your KneeRover
®
scooter comes equipped with a brake lock /
parking brake. Simply squeeze brake handle firmly and press the
button to engage the lock. To release the lock, squeeze the brake
handle again.
Ongoing Maintenance
With routine use, nuts and bolts on the steering column and brake
assembly can become loose. To ensure safe continuous operation of
this KneeRover
®
scooter, it is important to periodically inspect the
scooter for loose nuts and bolts and re-tighten as appropriate.
Please visit
kneerover.com/pages/kneerover-maintenance-
videos
for additional support in maintaining your KneeRover
®
knee
walker.
.
Locking Pin
Black Knob
for Steering
Height
Adjustment
BACK
sticker
MUST face
back toward
rear wheels
Steering
Guide Pin
Steering
Guide Stops
Clamp
Lever
Brake Lock
