background image

Important Safe Operation Practices

2

3

Training

1. 

Read, understand, and follow all instructions on the 

machine and in the manual(s) before attempting to 

assemble and operate. Keep this manual in a safe place for 

future and regular reference and for ordering replacement 

parts. 

2. 

Be familiar with all controls and their proper operation. 

Know how to stop the machine and disengage them 

quickly.

3. 

Never allow children under 14 years of age to operate this 

machine. Children 14 and over should read and understand 

the instructions and safe operation practices in this manual 

and on the machine and be trained and supervised by an 

adult. 

4. 

Never allow adults to operate this machine without proper 

instruction. 

5. 

Keep the area of operation clear of all persons, particularly 

small children and pets. Stop machine if anyone enters the 

area.

Preparation

1. 

Thoroughly inspect the area where the equipment is to 

be used. Remove all stones, sticks, wire, and other foreign 

objects which could be tripped over and cause personal 

injury. 

2. 

Wear sturdy, rough-soled work shoes and close fitting 

slacks and shirt. Loose fitting clothes or jewelry can be 

caught in moving parts. Never operate this machine in bare 

feet or sandals. 

3. 

Disengage clutch levers and shift (if provided) into neutral 

(“N”) before starting the engine. 

4. 

Never leave this machine unattended with the engine 

running.

5. 

Never attempt to make any adjustments while engine is 

running, except where specifically recommended in the 

operator’s manual. 

Safe Handling of Gasoline:

To avoid personal injury or property damage use extreme care 

in handling gasoline. Gasoline is extremely flammable and the 

vapors are explosive. Serious personal injury can occur when 

gasoline is spilled on yourself or your clothes which can ignite.  

Wash your skin and change clothes immediately.

a.  Use only an approved gasoline container.
b.  Never fill containers inside a vehicle or on a truck 

or trailer bed with a plastic liner. Always place 

containers on the ground away from your vehicle 

before filling.

WARNING! 

This symbol points out important safety instructions which, if not followed, 

could endanger the personal safety and/or property of yourself and others. Read and follow 

all instructions in this manual before attempting to operate this machine. Failure to comply 

with these instructions may result in personal injury. 

When you see this symbol. 

HEED ITS WARNING!

DANGER! 

This machine was built to be operated according to the safe operation practices in 

this manual. As with any type of power equipment, carelessness or error on the part of the 

operator can result in serious injury. This machine is capable of amputating fingers, hands, 

toes and feet. Failure to observe the following safety instructions could result in serious 

injury or death.

CALIFORNIA PROPOSITION 65

WARNING! 

Engine Exhaust, some of its constituents, and certain vehicle components 

contain or emit chemicals known to State of California to cause cancer and birth defects 

or other reproductive harm.

WARNING! 

Battery posts, terminals, and related accessories contain lead and lead 

compounds, chemicals known to the State of California to cause cancer and reproductive 

harm. 

Wash hands after handling

Summary of Contents for World Tiller Series 240

















Reviews: