Controls & Features
4
9
Tine Clutch Control
Clutch Cable
Tines
Depth Stake
Rear Wheels
Handle Knobs
Back of Tiller
Depth
Stake
Rear
Wheels
Tine Clutch Control
The clutch control lever is located on the upper handle.
Squeezing the lever against the handle engages the tine drive.
Release the lever to stop the tines from turning.
Handle Knobs
The handle height may be adjusted. Loosen the knobs and
remove the carriage bolts to change the position. Reinstall and
tighten the hardware when complete.
Depth Stake
The depth stake acts as a brake for the tiller and controls the
depth and speed at which the machine will operate.
Rear Wheels with Depth Stake
The rear wheels can be raised and lowered for transport and
storage. Refer to the Maintenance & Adjustments Section for
instructions on depth stake adjustment and the Assembly & Set-
Up Section for instructions on wheel adjustment.
Engine Controls
Refer to the engine manual for information and function of the
engine controls.
