Important Safety Information:
•
This product is not a toy.
Do not allow children to play with or near
this item.
•
The Heater’s base can be mounted to the vehicle using Mounting
Screws or an Adhesive Strip as desired.
•
Verify the that installation surface has no hidden wires or other
components before drilling or driving screws.
•
Do not mount or use when tired or when under the influence of
alcohol, drugs or medication.
•
Do not exceed the vehicle manufacturers’ rated fuse capacity in the
cigarette lighter circuit at all times.
•
Do not leave heater plugged in while starting vehicle or while
vehicle’s engine is off. Low voltage during these circumstances
will increase heat in the wiring and may blow the fusible link in the
receptacle or another fuse.
•
Check vehicle manual to ensure the cigarette lighter socket is rated
at 15 amps or greater. Do not use a socket extension or pigtail to
operate this Heater.
•
Only use this Heater for up to 15 minutes at a time.
Do not operate other 12VDC appliances at the same time.
OPERATING INSTRUCTIONS:
NOTICE: To prevent blowing a fusible link on the receptacle, only use
with 15 amp rated cigarette lighter socket.
1.
Place the Power Switch (11) and the LED Switch (16) in the O (Off)
position. Plug in the Cigarette Plug (17) into the vehicle’s cigarette
lighter socket.
2.
The Heater can be removed from the Mounting Base (6).
By holding the Handle (4/5) the Heater can be moved around as
needed.
3.
The LED Switch (16) turns the Light or Torch On/Off.
4.
To select either the fan only or heater and fan option, press the
Power Switch (11) to the setting as marked. Toggle Power Switch to
the centre position to turn off these functions.
WARNING: Do not operate longer than 15 minutes at a time, allow
heater to cool completely after use.
5.
Unplug the Heater before leaving the vehicle.
