ROWAN ELETTRONICA S.R.L. - Via Ugo Foscolo, 20 - 36030 CALDOGNO (VICENZA) ITALY
2
INDEX
page
- C119/92 Series - Technical characteristics - Standard Conformity
3
- Overall dimensions - Working principles
4
- Circuit silkscreen, trimmers, micro-switches, leds - terminal board
5
- Description of trimmers, microswitches, displays
6
- Standard set-up, Characteristics of single-phase motors and power absorbed by brake and fan,
Instructions for the connection of Rowan single - phase motors,
Motor service board connection
7
- Brake connection, instructions for connection and start-up , E.M.C. standard
8
- Connection diagrams, Examples of control terminal board connection 9
- Instructions for maintenance of Rowan motors
11-12
- Instructions for the replacement of previous drives 13-14
- Block diagram
15
Warning !
- ROWAN ELETTRONICA s.r.l. declines any responsibility for any inaccuracies contained in this manual, due to
printing and/or transcription errors. ROWAN ELETTRONICA s.r.l. reserves the right to make any variations that it
considers necessary for better functioning of the product, without prior notification.
- Regarding the data and characteristics mentioned in the manual, a maximum tolerance of 10% has been allowed,
if not otherwise indicated.
- The product guaranty is considered ex-works and is valid 6 months from the date of leaving ROWAN ELETTRONICA
s.r.l.
- The electrical equipment could create dangerous situations for the safety of both personnel and objects; the user
is responsible for the installation of the equipment and for the conformity of the installation with the regulations in force.
- The diagrams contained in this manual are mere examples and should be perfected by the customer according
to their specific needs.
- The equipment must be installed only by qualified personnel, after having read and understood this manual. In
case of doubt, the supplier should be contacted.
