137
the above, the product must not be operated on soft furniture such as beds, carpets, or
other soft surfaces. Do not place the product close to or above a heat source (radiator,
etc.). It is allowed to place the product in closed furniture or rooms only if sufficient
ventilation is ensured.
Do not push any objects through the louvers of the scanner. Live components may be
touched, components may be short-circuited, and a fire or an electrical shock may occur.
Prevent liquids from getting onto the scanner.
Prior to any intervention in the electric or mechanical part of the device, disconnect the
power supply.
Only use cleaning agents which are approved by the manufacturer for the respective
purpose.
The printing, scanning, and folding systems shall only be modified by authorized ROWE
service staff.
Please observe the service intervals.
Use only original ROWE wearing and spare parts or wearing parts approved by ROWE.
Use of wearing parts which are not approved by ROWE may damage the devices. ROWE
does not accept any liability if wearing parts are used which are not approved by ROWE.
Observe the safety notes on the wearing parts.
Dispose of packaging etc. according to the applicable legal regulations.
Plastic material must not be burnt.
B.3.5
Commitment of Operators
The operators undertake to
refrain from any working method impairing the safety and functionality of the system.
ensure that only trained and authorized staff works on the systems.
notify of modifications impairing safety and functionality of the system.
disconnect the system from the power supply before taking any maintenance and repair
actions.
B.3.6
Take-back of Devices at the End of Service Life (WEEE)
The device delivered by ROTH + WEBER GmbH is subject to the European Directive 2002/96/EC
and the corresponding implementation in the law of the respective EU member state (in Germany
ElektroG). Accordingly, you can return the device at the end of life for proper disposal and
recycling.
