52
Fit
: Printer does not print and instead requires the respective roll format giving a
message.
Larger
: Printer uses the larger format available next (e.g. ISO A0 instead of A1).
Larger (roll empty: fit):
If a fitting medium format is inserted but empty, the printer
does not print, but requires the respecting roll format. Otherwise the printer prints
to a larger format available next.
Larger (medium defined: fit):
If a fitting medium is defined but not inserted, the
printer does not print, but requires the respecting roll format. Otherwise the
printer prints to a larger format available next.
5.10.2.3 Output Settings for Inkjet Printer
In the advanced settings, you see the following
options if you selected an inkjet printer:
1.
Quality: Draft, normal, or high
2.
Cut On/Off: Set whether the paper is to
be cut off after output of a document.
Figure 5.20: Output settings for inkjet printer
5.10.2.4 Set Function
Figure 5.21: Set function
Figure 5.22: Query whether set shall be printed
immediately
As soon as you enable the set function (1), you are asked whether you want to print the
documents in the set immediately. If you press "Yes", the output is started immediately; if you
press "No", the output is started only after completion of the set (press (1) again).
5.10.3
Settings Independent of Function
In this section, those settings are described which are available in "Scan" as well as "Copy"
function. They mainly cover parameters such as color mode, brightness/contrast as well as
numerous other options for improving the quality of scans and copies.
