78
5.14
Configuration of ROWE SCAN/COPY APP
By pressing the button shown on the right which can be found on the left of the
action keys in the lower section of the ROWE SCAN/COPY APP you can make several
basic settings.
Access to the settings may be protected by a password. This protection
can be enabled in the parameter settings of ConfigManager (see 6.8). You
are then asked for the administrator password. The password is equal to
the administrator password set in ConfigManager (see Chapter 6.11).
Figure 5.51: Global settings
The following settings can be made:
Language
: Select the desired language of the texts in ROWE SCAN/COPY APP.
Speed
: Select automatic and reduced feed speed (to protect sensitive originals). The
height of the reduced speed can be set in the ConfigManager (see Chapter 6.10).
Backlight
: Enhanced presentation of extremely dark originals.
Prescan mode
: Determine behavior when pressing the
Prescan
button:
Normal prescan
: Prescan is effected with the selected settings. The preview then
corresponds to the result obtained when pressing the
Start
button.
Fast prescan
: A fast prescan with reduced resolution is effected. Using the mouse,
you can afterwards highlight an area which you want to scan with the selected
