DLW-1 Phonograph
3-2
21822662
INSTALLING THE JUKEBOX
Step 1. Connect to the Network
Do not connect to the network until it has been installed and tested by Ecast. The DLW-1 jukebox
connects to the Internet via the router. A “straight through” Ethernet cable must be run between the
jukebox and the router. Connect one end from the Ethernet port on the outside of the CC enclosure and
thread the cable out an access hole in rear of phonograph. Connect the other end to the port labeled
“Ethernet 8” on the Router (see figure 3-1).
NOTE:
Please see “Ethernet Cable Pin Out and Instructions” in order to build a custom network cable
at the venue.
Step 2. Provide Power to the Unit
The unit ships with a 6-foot power cord designed to plug into a standard grounded wall outlet. The
DLW-1 requires 120 VAC power that is ON 24 hours a day for daily communication with the network.
The communication updates software and albums, and verifies that the DLW-1 is functional. Most
updates occur when the venue is closed. The DLW-1 will stop working if there is no communication with
the network for 7 days.
Step 3. Connect the Extension Speakers
See “Sound System Setup”
Step 4. Optional:
Remove the Volume Control Unit from the phonograph. Mount the Volume Control Unit remotely.
Connect the 6 conductor modular cable to the Volume Control Unit and the Rowelink Controller.
The top access hole in the phonograph rear provides easy access to the Rowelink Controller.
Step 5. Power on the Jukebox
• Plug the AC power from the back of the jukebox into a standard, grounded wall outlet and check that the
system power supply POWER switch is in the ON position.
• Press the red button (figure 2-1) at the front left of the UPS. The UPS will beep once and a green LED will
light to indicate it is on.
• If the CC does not start automatically, press the CC ATX power button (see figure 2-2) in once and
release. This boots up the CC and starts the application.
FIGURE 3-1
DSL LINE
POWER CORD
ETHERNET CABLE
FROM JUKEBOX
Summary of Contents for StarLink DLW-1
