7
10min
HOW THE APPLIANCE OPERATES
This appliance has 2 operating modes (MANUAL or AUTOMATIC) as well as various additional func-
tions.
• ”ON/STAND-BY”: Switch on / Standby (Stop); Button A.
Press button (A) to start the appliance or to put it on standby.
MANUAL FUNCTION MODE:
Adjusting the required (target) level of humidity and vaporisation speed
• Humidity level: Button C for adjusting the required (target) humidity level;
Select the required humidity level by pressing button C several times.
When SELECT appears, the humidity level displayed is the required level that you have set the ap-
pliance to: between 40% and 75% RH or “Co” for a continuous operation (there is a safety stop sys-
tem if the humidity level in the room exceeds 90% RH).
When the “HOUSE” logo is visible without SELECT, the humidity level displayed is that of the area in
the room around the appliance.
PLEASE NOTE: This setting cannot be used for “Smart” modes.
WARNING: In the continuous operating mode, the humidity in the room can reach very high levels
that are not beneficial to health and can damage certain objects. The recommended optimal humi-
dity level is between 50 and 60% HR.
• Vaporisation speed: Button F for setting the vaporisation speed;
Select the required vaporisation speed by pressing button F several times. There are three vaporisa-
tion speeds to choose from.
PLEASE NOTE: This setting cannot be used for “Smart” modes.
SMART OPERATION MODES:
How to use the 3 pre-set operating modes
• SMART MODES: Button E for selecting the pre-set operating modes;
You can select one of the three pre-set modes by pressing button E several times.
AUTO Mode:
Automatic operation mode for a required humidity level pre-set at 55% RH; the ap-
pliance will automatically adapt its vaporisation speed depending on the humidity of the room.
BABY Mode:
Automatic operation mode for a required humidity level pre-set at 50% RH; the ap-
pliance will automatically adapt its vaporisation speed depending on the humidity of the room. Once
it has been running for 7 hours the appliance will stop automatically.
PLEASE NOTE: The lights and beeps are deactivated in this mode.
NIGHT Mode:
Automatic operation mode for a required humidity level pre-set at 50% RH; the ap-
pliance will gradually reduce its vaporisation speed. Once it has been running for 8 hours the ap-
pliance will stop automatically.
PLEASE NOTE: The lights and beeps are deactivated in this mode.
EN
