d) Ironing board cover
•
We recommend ironing the ironing board cover with a very hot iron before
you use it for the first time.
•
Washing instructions: machine-washable at 40°C.
•
Removing the cover:
1. Loosen the drawstring by pulling the fastener downward (19).
2. You can now remove the cover.
•
Replacing the cover:
1. Check that the drawstring is loose by pulling the fastener downward.
2. Spread out the cover, wrapping it all round the board.
3. Tighten the drawstring by moving the fastener upwards.
•
Replacement ironing board covers are available. Product reference: ZD 7200.
(19)
11 • RINSING OUT THE BOILER
Important :
•
To extend the life of your boiler and to avoid any build-up of scale, it is
essential
to rinse
out the boiler after every 10 uses. If your water is hard, you should rinse the boiler more
frequently.
•
Never use descaling agents when rinsing out the boiler, as they could damage it.
a) Rinsing the boiler using the rinsing accessory
For easier and more effective boiler rinsing, we recommend using the rinsing accessory supplied
with your ironing station (20).
It will make rinsing the boiler easier as the steam generator will require less handling.
Your rinsing accessory has been designed to fit a wide range of taps. It is supplied with two types
of membrane (21) (a) (b). Choose the one best suited to your tap.
(20)
(21)
(a)
(b)
Before rinsing your steam generator, you MUST let your ironing station cool for 2 hours, to
prevent any risk of burns.
Recommendation:
To avoid the need to wait, we recommend rinsing the boiler before you start your ironing
session.
