background image

5

  BEFORE USE

Please read the instructions for use and the 

Important Safeguards

carefully.

Remove the transparent soleplate protector.

It is normal for a small amount of smoke to be produced the first
time the iron is used. This will quickly disappear.

  3-WAY AUTO-OFF

If the iron is not moved while it is plugged
in, an internal safety switch will turn it off.
It will turn off in 8 minutes if left vertically
or in 30 seconds if left on its soleplate or
tipped over. A red flashing light indicates
that the auto-off has been activated.
To switch the iron on again, move the iron
or gently shake it.

Wait until iron is fully reheated before
use.

  STEAM IRONING

  Filling with water

Ensure the iron is unplugged.

Slide the variable steam control comple-
tely to the left.

Open the water filling inlet cover.

Hold the appliance upright so that the
water inlet is horizontal. Fill with water
(containing no additives) to the max.
water level mark and close the lid.

  Adding water

If you need to add water during ironing.
UNPLUG the iron and repeat above
steps.

Ensure iron is fully reheated after filling
(temperature indicator light goes out)
before ironing.

To avoid damage to clothes from dust
or dirt that may collect in the iron, we
recommend that for the first use or after
the iron has been stored for some time
that you first iron an old cloth, testing
both the steam and burst of steam
feature.

min

Clean

min

max

Self

30 sec.

8 min.

30 sec.

Summary of Contents for Ultra Professional Ultra Profe












Reviews: