2. PRODUCT DESCRIPTION
A. ON/OFF switch
B. Smoothing plates with
Ceramic Titanium Tourmaline
coating
C. Floating lower plate
D. Pro-Curling System lateral edges
E. LCD digital temperature display
F. Buttons -/+ to reduce and increase temperature setting:
1. 8 temperature positions (260 => 400°F)
2. Temperature locking/unlocking
G. Lock System (to lock and unlock the flat iron)
H. Storage pouch
I. Surrounding Silicon Rubbers for soft grip on hair
3. GETTING STARTED
1.
Lock System (Fig3) : To open the clamps, pull the Lock
System back. To lock the clamps: close the clamps and push the
"Lock System“ to the front.
2.
Plug in the appliance.
3.
Set the ON / OFF switch to position I. (B)
4.
Your appliance will heat up very quickly (ready to use in less
than 30 seconds) and the temperature will remain stable
throughout use. (Fig. 1)
5.
Select the ideal temperature for your hair using the -/+
buttons (fig. 2): press the – button to reduce the temperature or
the + button to increase it. The temperature indicator flashes
until the selected temperature is reached.
6.
After use: Place ON/OFF (B) switch in the stop position (0),
close the clamps, use the "Lock System", unplug the appliance
and leave it to cool down completely before putting it away.
Note:
To avoid any handling error (inadvertently pressing the
+/- buttons during use) this appliance is equipped with a
locking function.
If you wish to lock your temperature setting during use, press
the + or – button for 2 seconds. Your setting is being locked, a
padlock appears on the screen
If you wish to change your appliance’s temperature, you will
need to unlock it by again pressing the + or – button for 2
seconds. Your setting is being unlocked, the padlock disappears
from the screen.
You can change the temperature by pressing the b/-.
4. USING YOUR STYLER
4.1 - How should you straighten your hair?
Hair must be untangled, clean and dry.
• Do not use the appliance on synthetic hair (wigs,
extensions, etc.).
1800127884_01_SF6158U2:Mise en page 1 12/11/12 14:46 Page5
