31/44
3. Operating Instructions
3.1 Device overview
Fig. 2: Device overview
No. Designation
1
Glass top
2
ON/OFF switch for LED lighting
3 Base
4
Motion sensor
5
ON/OFF switch for heating element
Tab. 2: Device description
3.2
Starting operation
After assembling the individual components, the device can be put into operation. Proceed
as follows for this:
1. Make sure that the ON/OFF switch of the heating element (see Fig. 2, No. 5) is at "0".
Then connect the infra-red table radiant heater to an earthed socket protected with an
earth-leakage circuit breaker.
2. Now switch on the device by moving the ON/OFF switch of the heating element (see
Fig. 2, No. 5) to the "—" position. The device begins to glow.
3
1
2
1
2
4
3
5
GB
