303002-03-12-13 en ma 2012.08
CARE & MAINTENANCE
Never move a toaster whilst it is operating.
Wipe down with a damp
cloth and proprietary multi-surface cleaner to remove any grease. Never
use a scouring agent as this will scratch the finish. Always empty your
crumb tray at frequent intervals as this aids toasting performance and
reduces the risk of smell, smoke and burning. On the multi and
Sandwich models after each use ensure any spilt filling is removed from
carrier and crumb tray.
Bread containing fruit or nuts can be toasted but natural sugars present
may cause them to stick to the guard rails on your toaster. Such debris
should not be left on the guard rails as it will char and possibly smoke
and can swell so as to damage the element.
Once the timer has started an element gives out heat from both sides, so
the first “unpowered” slot will always give out heat on one side. Cooking
times will reduce as elements “warm up”.
SERVICING & REPAIRS
Elements wear out with use and it is impossible to predict their life
as this is affected by the amount and type of use and the quality of
electrical supply. They can easily be damaged by careless handling.
Your toaster has been designed that should anything go wrong all major
components such as elements and switches can easily be replaced.
Repairs or replacement of components should be undertaken only by a
competent electrician. All components and fitting instructions can be
obtained from your supplier or directly from the manufacturer.
