Side view
Front panel frame
Hinge knuckle sits
forward of the front
panel
25mm
Front of
assembly
Door
Hinge knuckle
25mm
Metal handle bar
30mm
9. Doors
Open the hinges out flat on the left door. Position the door as shown below with the hinge flat against the frame of the front panel. Align the hinge so that the knuckle
sits forward of the panel. Adjust the height of the door to fit centrally in the gap and secure the hinge in place using 24 x 25mm screws. Repeat for the right-hand door.
To fit the door handle. Push the door lock into the rebate on the edge of the right-hand door as shown and secure using 2 x 25mm brass screws. Push the metal handle
bar through the door latch mechanism. Fit a door handle to the metal handle bar on each side of the door and secure them in place using 4 x 30mm black countersunk
screws per handle. On the other door fit the lock plate using 2 x 25mm brass screws.
25mm
10. Door weather strips and beading
To the right-hand door position a weatherstrip over the join between the 2 doors and secure in place to the inner door only using 4 x 38mm screws. Position a second
weatherstrip in the same position on the left-hand door and secure in the same way to the inner door only.The third weatherstrip is positioned on the left hand door so
that it overlaps the edge of the outer door, secure in place with 4 x 38mm screws. Fit the beading strips to the frame of the front panels as shown below and secure in
place using 5 x 20mm nails per strip.
Overhead view of left-hand door and front panel
Left front panel
Left inner door
Left outer door
Right front panel
Right inner door
Right outer door
Overhead view of right-hand door and front panel
Weather strip overlaps both
doors and secured to inner
door only.
Weather strip overlaps both
doors and secured to inner
door only.
Weather strip overlaps door
edge.
beading fitted to the front
panel framing.
beading fitted to the front
panel framing.
38mm
20mm
