Art
icle number: 16
8129
Document number: A
SS20
13
000
40
1 v
ersion C
Roxtec International AB
Box 540, 371 23 Karlskrona, SWEDEN
PHONE
+46 455 36 67 00,
FAX
+46 455 820 12
info@roxtec.com, www.roxtec.com
R
oxt
ec ® and Mult
idiamet
er ® ar
e r
egist
er
ed t
rademarks o
f R
oxt
ec in S
w
eden and/
or o
ther count
ries
.
Note
O
Integrated environmental sealing system for bonding and grounding applications. For use with armored cables.
O
For optimum reliability, wait 24 hours or longer after installation before exposing the cables or pipes to strain or pressure.
O
Cables shall go straight through the frame.
O
To be used with: Roxtec CM BG B components.
O
To simplify installation in frames with more than one opening, fill all openings before tightening the compression units.
O
The final complete bonding/grounding installation has to comply with applicable codes and regulations.
O
Approvals or certificates may include amendments or limitations related to this application.
O
The latest version of this and related documents are found at roxtec.com.
Disclaimer
”The Roxtec cable entry sealing system (”the Roxtec system”) is a modular-based
system of sealing products consisting of different components. Each and every
one of the components is necessary for the best performance of the Roxtec
system. The Roxtec system has been certified to resist a number of different
hazards. Any such certification, and the ability of the Roxtec system to resist
such hazards, is dependent on all components that are installed as a part of
the Roxtec system. Thus, the certification is not valid and does not apply unless
all components installed as part of the Roxtec system are manufactured by or
under license from Roxtec (“authorized manufacturer”). Roxtec gives no perfor-
mance guarantee with respect to the Roxtec system, unless (I) all components
installed as part of the Roxtec system are manufactured by an authorized
manufacturer and (II) the purchaser is in compliance with (a), and (b), below.
(a) During storage, the Roxtec system or part thereof, shall be kept indoors in
its original packaging at room temperature.
(b) Installation shall be carried out in accordance with Roxtec installation
instructions in effect from time to time.
The product information provided by Roxtec does not release the purchaser of the
Roxtec system, or part thereof, from the obligation to independently determine
the suitability of the products for the intended process, installation and/or use.
Roxtec gives no guarantee for the Roxtec system or any part thereof and as-
sumes no liability for any loss or damage whatsoever, whether direct, indirect,
consequential, loss of profit or otherwise, occurred or caused by the Roxtec
systems or installations containing components not manufactured by an aut-
horized manufacturer and/or occurred or caused by the use of the Roxtec
system in a manner or for an application other than for which the Roxtec
system was designed or intended.
Roxtec expressly excludes any implied warranties of merchantability and fitness
for a particular purpose and all other express or implied representations and
warranties provided by statute or common law. User determines suitability of
the Roxtec system for intended use and assumes all risk and liability in con-
nection therewith. In no event shall Roxtec be liable for indirect, consequential,
punitive, special, exemplary or incidental damages or losses.”
Module size
Total braid cross-section
mm²
Approximately equivalent
AWG
CM 20 BG B
8
8
CM 20w40 BG B
4*
11
CM 30w40 BG B
13
6
CM 40 10-32 BG B
21
4
CM 40 BG B
21
4
Roxtec CM BG™ B modules
Braid conductor properties
* Per cable
